About this application note

 
This application note handles the setup and configuration of Brivo and a Gatekeeper 410X/1250X or ModuleX. In this integration the AVUTEC ANPR camera recognizes license plates and transmit the data to the Brivo access control system.
The Brivo system then verifies this data against its database of authorized license plates, deciding whether to allow or deny access.

Wiegand

In this integration the 26-bit Wiegand protocol is used to facilitate communication between the ANPR cameras and the Brivo controller.

Mounting and commissioning of the camera

For guidance on the installation and setup of the camera, AVUTEC provides an online manual, accessible at www.avutec.com/support/ with the password ‘Avutec!’. Here, you’ll find dedicated manuals for both the Gatekeeper and Module models, along with a Quickstart guide applicable to both.